UNIVERSAL GPS DASHBOARD DATA LOGGER CHRONOMETER I2M "CHROME PRO2"
This display is universal but not compatible with Ducati 1098,1198, Panigale 899/959/1199/1299
(For these bikes listed there is a specific version online on our site)
For correct assembly it is also necessary to purchase the specific I2M wiring for your motorcycle model, available at our website.
Thanks to the use of a new dedicated hardware, the Chrome Pro 2 is able to read and acquire over 128 Can Bus channels that are alongside the 30 standard channels including speed, rpm, external analoguse, tire pressures and temperatures, GPS, gears, water oil ...
The new hardware allows to make the acquisition of the channels fully configurable with a maximum frequency of 500Hz for each channel, thus reaching a total sampling frequency of over 65 kSample/s!
Designed for the most demanding user, now the Chrome Pro 2 is not only able to connect to a WiFi network thanks to its integrated antenna, but can create a Wifi HotSpot itself. The connectivity then extends to the management of Polar H7 and H10 low energy heart bands and connectivity to PC and Mac not only via USB stick but also via a special configuration cable.
Great attention has been paid to the total configurability of every aspect starting from the alarms, now all RGB, up to the possibility of creating non-linear sensors for each input.
A new integrated wiring with a single IP67 connector and new adaptation cards complete the new experience related to the Chrome PRO 2.
Thanks to the new integrated Bluetooth BLE receiver, it is possible to connect the Chrome PRO 2 to a Polar H7 or H10 heart rate sensor. A heart-shaped icon on the screen will indicate the successful connection by making your heart beat on the screen in proportion to your heart rate. The data are then acquired in order to be subsequently reviewed so as to plan a correct physical training and targeted on the basis of personal physical effort.
The Chrome Pro 2 is equipped with a video input to which you can connect a Logitech C270 cam with 1280x720 25fps resolution, while audio recording is entrusted and an internal microphone so as to be shielded from the wind by returning an excellent rendering of vehicle sounds. A CNC aluminum case is available to replace the original plastic case of the C270 logich. This allows to make the webcam watertight by providing it with a comfortable attachment compatible with Go Pro supports and a screw binder connector to connect it directly to the Chrome.
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
Thanks to the collaboration with Tecnoart Sersan, the Chrome PRO 2 is enriched with new screens.
Born in 2018 thanks to the development of a special graphic for its special on MV, the collaboration has generated this time new screens that will gradually enrich those already present on the Chrome Pro2.
The Chrome PRO 2 has a 433MHz receiver inside that allows it to receive the signals of our TPMS sensors by storing up to 4 sensors for each wheel. It is therefore possible to always keep the pressure of both tires and the temperature of the rim monitored, so as to check correct heating with the tire warmers. The configurable alarms allow you to set the RGB LEDs to report any abnormal pressure and temperature values. Finally, the values are acquired so that they can be processed later. The Chrome PRO 2 is supplied complete with two TPMS sensors with relative adapters for 90-degree valves which can be requested in the 8.5 mm or 11.5 mm diameter format.
TMPS sensors included.
Available for rims with 8.3 mm or 11.3 mm hole (valves not included)
- 5 "color graphic display 800x480
- Very high visibility even in direct sunlight
- 1GHz processor with 1GB of RAM memory
- Aluminum CNC case
- Fully configurable pilot and mechanic pages
- Trajectory detection and GPS speed at 10Hz with 66 channels in parallel
- Stopwatch function with 20 preset circuits, memory of 500 laps per circuit
- Automatic recognition of the circuit, with four sectors
- Calculation of best lap, ideal, difference with the best lap or with the last lap, historical and current day maximum values
- Programming via USB stick, WiFi or with USB cable (otional)
- 11 fully configurable high brightness RGB alarms
- IP67 protection
- Polar H7 or H10 heart rate belt connection
- 8 10-bit analog inputs
- 2 speed inputs and 1 RPM input
- Separate fully configurable water, petrol and oil inputs, also Can Bus
- 128 channels of Can Bus acquisition at 500Hz each
- Overall sampling rate greater than 65kSample / s
- Data download via USB stick, or WiFi
- Possibility to connect a two button remote control without additional interfaces
- Auxiliary can bus for expansion modules
- Storage on 16GB internal memory
- Possibility of webCam C270 connection for synchronization of the acquired data
- 3 different distance meters, 2 operating hours and total laps
- Integrated lambda probe controller and BOSH LSU 4.9 sensor included
- TPMS receiver with 4 pre-programmable channels per wheel and two sensors included
FORE MORE INFO PLEASE CONTACT US
Pas de questions pour le moment.
Votre question a été envoyée avec succès notre équipe. Merci pour la question!
